Call 08042901475 71% Response Rate

Send Email

Corrosion Inhibitor

Leading Manufacturer of shaliplast lw++ admixture cum corrosion inhibitor and shaliplast lw++ ci corrosion inhibitor from Kolkata.
ShaliPlast LW++ Admixture Cum Corrosion Inhibitor

ShaliPlast LW++ Admixture Cum Corrosion Inhibitor

Product Price: Rs 160 / LitreGet Best Price

Product Brochure

Product Details:
ColorBrownish
Shelf Life12 Months in original unopened sealed condition
BrandShaliPlast
StorageStore in cool and dry place,under shed,away from heat within temperature 5 Degree C to 40 Degree C
Packing1 L container
Specific Gravity @ 30 Degree C1.06 +- 0.01
pH8 - 13
Water Permeability< 50% of control
Compressive Strength MpaEqual to control
Non-Volatile Content17 +- 1%
Chloride Content< 0.02%
Setting Time40 - 550 Minutes
Dosage200 ml / 50 kg cement
Description:
  • ShaliPlast LW++, an additive for RCC concrete, is an integral liquid waterproofing compound consisting of surface active agents, plasticizer, polymer additives and corrosion inhibitor.
  • ShaliPlast LW++ is used as an additive for RCC to make concrete cohesive by reducing cement voids / capillaries.
  • ShaliPlast LW++ protects concrete from water ingress as well as saves the re-bars of reinforced concrete and mortar against chloride induced corrosion. The unique bi-polar compound migrates through concrete during curing process and puts a passive layer over re-bars to stop chloride corrosion
  • ShaliPlast LW++, being an Admixture-cum-Corrosion Inhibitor, is designed for use in concrete as such. For any mix design where other water reducing admixture is already present, a compatibility study is suggested for such applications before going for bulk batch production of concrete.
  • It conforms the requirements of IS 2645 : 2003, IS 9103 and ASTM C 1582M.

Application:
  • Bridges and Marine structures
  • Used in RCC floors, walls and slabs
  • Mass concrete casting making dyke walls
  • Deicing areas.

Advantages:
  • Corrosion resistant & highly impermeable
  • Easily dispersible & compatible with RCC
  • High compressive strength
  • Reduces shrinkage crack development. 
  • Provides greater workability
  • Increases durability of concrete

Application Methodology:
  • Dry mix cement, sand, aggregate in concrete mixer for 2 minutes
  • Add 75-80% of required water into the mix and mix for 3 minutes
  • Add ShaliPlast® LW++ @ 200 ml per 50 kg bag of cement in remaining water and then wet mix for 2 minutes after adding such dosed water
  • Place the RCC
  • Cure the applied RCC as per good construction practices
  • Alternatively, in case of repair, ShaliPlast® LW++ may be sprayed over concrete @ 100 ml / m2 , depending on porosity of surface
  • In case of small repairs, where spray application is not economical, application can be carried out by brush. 
  • For Air entraining agent, a pre-blend trial must be done to decide the doses of air entraining agent as ShaliPlast® LW++ with air entraining agent increases air producing efficiency
  • ShaliPlast® LW++ is Compatible with all types of Portland cement including SRC (Sulphate Resistance Cement)
  • ShaliPlast® LW++ is not compatible with high alumina cement.

Dosing:
  • 200 ml per 50 kg bag of cement in case of preparation of concrete for RCC
  • Do not allow over dosing. Due to overdosing setting time will be extended rigorously
  • It is advisable to carry out a trial to establish the exact & optimal dosage rate depending upon set retardation required.

Health & Safety:
  • Avoid contact with skin / eyes and avoid swallowing
  • Ensure adequate ventilation and avoid inhalation of vapour
  • Wear suitable protective clothing, gloves and eye protection
  • In case of skin contact, rinse with plenty of clean water, then cleanse with soap and water. Do not use solvent to clean the contacted area
  • In case of eye contact, wash with plenty of clean water and seek medical advice. 
  • If swallowed, seek medical attention immediately. Do not induce vomiting.

Packing: 20 L and 200 L 
Get Best QuoteRequest Callback
ShaliPlast LW++ CI Corrosion Inhibitor

ShaliPlast LW++ CI Corrosion Inhibitor

Product Price: Rs 145 / LitreGet Best Price

Product Brochure

Product Details:
Packaging TypeBucket
Packaging Size20 L
ColorBrown
Shelf Life18 Months in original unopened condition
BrandShaliPlast
StorageStore in a cool dry place under shed away from heat
PackingAvailable in 20 L and 200 L
pH7 - 9
Specific Gravity @ 25 Degree C1.05 - 1.08
ShaliPlast LW++ CI is corrosion inhibitor, which protects steel bars imbedded in concrete through formation of protection layer around bars formed by migratory corrosion inhibitor.

ShaliPlast LW++ CI may be used in construction with any admixture being used at site

Application:
  • Used for concrete in contact with chlorides from a marine environment
  • Effective in parking structures
  • Marine structures
  • Bridges
  • Deicing salts

Advantage:
  • Corrosion protection for embedded reinforcing steel, especially from chloride attack
  • Extends the service life of structures in a de-icing salt and marine environment.

Application Methodology:
  • Add ShaliPlast LW++ CI to the dosing water or added with it in to the concrete mixer. It should not come into contact with dry cement. It may also be added to the concrete in the transit mixer at the point of discharge. 
  • ShaliPlast LW++ CI is compatible with other admixture, however each admixture should be added to the mix separately
  • When ShaliPlast LW++ CI is used with an air entraining agent then the dosage rate of air entraining agent should be reduced. ShaliPlast LW++ CI may react with the air entraining agent increasing its air producing efficiency. 
  • Compatible with all types of Portland cement including SRC (Sulphate Resistance Cement) and not compatible with high alumina cement.

Dosing:
  • 0.4 – 2 % by weight of cement (depending upon the depth of the rebar, concrete quality. If ShaliPlast LW++ CI is to be added on cured concrete dose is minimum 1.8%). Do not allow over dosing. Due to overdosing setting time will be extended rigorously. It is advisable to carry out a trial to establish the exact & optimal dosage rate depending upon set retardation required.

Health & Safety:
  • Avoid contact with skin / eyes, and avoid swallowing
  • Ensure adequate ventilation and avoid inhalation of vapour
  • Wear suitable protective clothing, gloves and eye protection
  • In case of skin contact, rinse with plenty of clean water, then cleanse with soap and water. Do not use solvent to clean the contacted area
  • In case of eye contact, wash with plenty of clean water and seek medical advice. 
  • If swallowed, seek medical attention immediately. Do not induce vomiting. 
Get Best QuoteRequest Callback

EXPLORE MORE CATEGORIES

Looking For "Corrosion Inhibitor"?
Thank youYour Enquiry has been sent successfully.
© STP LIMITED. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.