EXPLORE MORE CATEGORIES
- Home
- ยป
- Our Products
- »
- Sealing Compound
Sealing Compound
Prominent & Leading Manufacturer from New Delhi, we offer shalitex sealing compound and shalijet sealing compound.
ShaliTex Sealing Compound
Product Price: Rs 175 / KgGet Best Price
Product Brochure
Product Details:
| Brand | ShaliTex |
| Packing | 20 kg drum |
| Storage | Keep in cool and dry place, under shed, away from heat |
| Max. Flow Test | 5% |
| Max. Pour Point | 180 Degree C |
| MIn. Softening Point | 85 Degree C |
| Penetration (25 Degree C, 0.1 mm, 5 sec.) | 15 - 50 |
| Min. Extensibility | 6 mm |
| Color | Black |
Application:
- Runway Joints
- Joints in garages, filling stations and other places of construction joints like in warehouse floors and secondary containment of walls and floors of artificial water ponds.
- Bridge / road joints.
Advantages:
- Ability to withstand expansion without cracking
- Good adhesion to concrete / other surface.
- Low susceptibility to flow during hot weather condition.
- Resistant to sunlight / rain and cyclic temperature changes.
- Anti-corrosive and prevents root growth.
- Resistant to ingress of foreign substance.
Application Methodology:
- Remove dust, flakes, oil, grease or other foreign particles by jet or dry air and clean the surface to make it smooth before applying ShaliTex Sealing Compound.
- Spray or brush, on the area where ShaliTex Sealing Compound is to be applied, ShaliTex Primer evenly throughout the joints and allow it to dry completely. 24 hours is enough to dry the primer during normal weather condition
- Cover the joint by plastic film if rain is expected after primer application
- Cut ShaliTex Sealing Compound drum and heat it to 180 – 210 OC while slowly stirring the material for uniformity. A 20 kg drum will take 2-3 hr at 190 – 200 OC for complete melting using hand stirrer. Do not overheat as this may cause frothing. If for any reason bubble appears during melting, keep the temperature around 180 OC for a longer time with slow manual stirring till the bubble disappears
- Upon primer drying completely, pour molten ShaliTex Sealing Compound from one side of the joint allowing it to travel through the joint as much as practicable. While pouring, ensure that temperature of material is in the range of 190 - 200 OC
- During the pouring process, to avoid spillage, place wooden boards on both sides of joint and pour from can with extended spout.
Health & Safety:
- ShaliTex Sealing Compound is inflammable
- Use goggles, gumboots, nose covers and hand gloves during application
- Clean hands with warm soap water after application
Theoretical Coverage, 100 meters of running joint of 25 mm depth, kg:
- 12 mm: 36
- 18 mm: 54
- 25 mm: 75
Aviation Fuel / Kerosene Resistance Test, change in Penetration after 7 days immersion in Aviation fuel / kerosene, at 25 OC, 100 g./ 0.1 mm / 5 sec., max.: Not Applicable
Other Packing: 200 kg
Get Best QuoteRequest A Callback
ShaliJet Sealing Compound
Product Price: Rs 200 / KgGet Best Price
Product Brochure
Product Details:
| Packaging Size | 26 kg |
| Packaging Type | Drum |
| Brand | ShaliJet |
| Max. Flow Test @ 45 Degree C | 5% |
| Max. Change in Mass | 1% |
| Max. Pour Point | 180 Degree C |
| Penetration (25 Degree C, 0.1 mm, 5 sec.) | 15 - 50 |
| Min. Extensibility | 6 mm |
| Storage | Keep in cool and dry place, under shed, away from heat. |
Application:
- Runway Joints.
- Joints in garages, filling stations and other places of construction joints like in warehouse floors and secondary containment of walls and floors of artificial water ponds.
- Bridge / road joints.
Advantages:
- Fuel spillage resistant.
- Jet exhaust heat resistant.
- Good adhesion to concrete / other surface.
- Low susceptibility to flow during hot weather condition.
- Resistant to sunlight / rain and cyclic temperature changes.
- Anti-corrosive and prevents root growth.
- Resistant to ingress of foreign substance.
Surface Preparation:
- Remove all loose gravel, dirt, oil, grease and foreign matter by jet of dry air and clean the surface mechanically or by grinding to make it smooth before application.
Material Preparation:
- Cut ShaliJet Sealing Compound drum and heat it to 180 – 210 OC while slowly stirring the material for uniformity. A 26 kg drum will take 2-3 hrs at 190 – 200 OC for complete melting using hand stirrer.
- Do not overheat as this may cause frothing. If for any reason bubble appears during melting, keep the temperature around 180 OC for a longer time with slow manual stirring till the bubble disappears.
Application of Material:
- Apply a coat of ShaliPrime SSC @ 0.30 L / m2
- Allow it to dry for 24 hrs
- Pour molten ShaliJet® Sealing Compound from one side of the joint allowing it to travel through the joint as much as practicable
- Ensure that temperature of material is in the range of 175 - 180 OC during Application.
- During the pouring process, to avoid spillage, place wooden boards on both sides of joint and pour from container with extended spout.
Health & Safety:
- Avoid contact with skin / eyes, and avoid swallowing
- Ensure adequate ventilation and avoid inhalation of vapor
- Wear suitable protective clothing, gloves and eye protection
- In case of contact with skin, rinse with plenty of clean water, then cleanse with soap and water. Do not use solvent to clean the contacted area
- In case of contact with eyes, wash immediately with plenty of clean water and seek medical advice
- If swallowed seek medical attention immediately. Do not induce vomiting.
Other Packing: 260 kg
Get Best QuoteRequest A Callback