Call 08042901475 71% Response Rate

Send Email

Waterproofing Admixture

Offering you a complete choice of products which include shaliplast shotcrete l liquid set accelerating and shotcreting admixture, stp no 1 liquid waterproofing plasticizing admixture and shaliplast pce poly carboxylated ether based superplasticiser.
ShaliPlast Shotcrete L Liquid Set Accelerating And Shotcreting Admixture

ShaliPlast Shotcrete L Liquid Set Accelerating And Shotcreting Admixture

Product Price: Rs 100 / KgGet Best Price

Product Brochure

Product Details:
ColorColorless
BrandShaliPlast
Shelf Life9 Months in original unopened condition
StorageStore in a cool dry place under shed away from heat
PackingAvailable in 20 kg & 200 kg drum
Minimum Application Thickness1.3 mm
Typical Compressive Strength Age (8 hrs)>5 MPa
Typical Compressive Strength Age (1 Day)>14 MPa
Typical Compressive Strength Age (3 Days)>23 Mpa
pH10 - 11
Specific Gravity1.30 - 1.40
Initial Setting Time3 - 4 Minutes
Final Setting Time0 - 12 Minutes
ShaliPlast Shotcrete L (formerly known as Shali SR- SC (SL)) is a silicate based, chloride free accelerator to be generally used as a quick setting and waterproofing compound for sprayed concrete. ShaliPlast® Shotcrete L enables spraying of concrete or mortar even on a wet surface, allows overhead spraying and reduces rebound. ShaliPlast Shotcrete L is eco-friendly. It conforms to specification prescribed in ASTM C – 1141 Type II Grade I Class A

Applications:
  • Tunnel.
  • Parking decks.
  • Bridges structures.
  • Pier and dock supports.
  • Marine environments.
  • Dams.
  • Retaining walls.
  • Manholes.
  • Guniting projects

Advantages:
  • Low rebound for shotcrete applications.
  • Helps protect rebar from corrosion
  • Low shrinkage properties
  • Quick setting properties
  • Easy overhead guniting
  • Improved water tightness & reduced permeability.

Application Methodology:
  • In case of surface preparation, concrete to be shotcreted must be clean and rough. All oil, dirt, debris, paint and unsound concrete must be removed. The surface must be prepared mechanically using a bush hammer, sandblaster or jackhammer which will give a surface profile of a minimum 1/8” (3mm) and expose the coarse aggregate of the concrete. The final step in cleaning should be the complete removal of all residue with a vacuum cleaner or pressure washing.
  • No bond coat is required for this product.
  • In case of application Set up wet shotcreting equipment in an area convenient to the placement site. Add ShaliPlast® Shotcrete L directly to the gun near the tip of the shotcreting nozzle. Skilled nozzle operation and thorough mixing within the concrete are essential. The concrete workability must be adjusted to suit the spray equipment, its capacity, temperature and other local conditions.

Dosage:
  • For layer thickness of up to about 20cm in one go, dosage is between 3% & 12% by weight of
  • Cement. Actual dosage is to be finalised on the basis of site trials.

Precautions:
  • In adverse temperatures, follow ACI recommendations for hot/cold weather concreting practices.
  • Setting time and hardening of cement paste varies with dose of ShaliPlast Shotcrete L with different quality as well as quantity of cement.
  • Minimum application thickness 1.3 mm
  • For optimum results, condition material to 18 – 29 OC
  • Store product in dry place.
  • Clean tools and equipment with water before the material hardens.

Health & Safety:
  • Avoid contact with skin / eyes and avoid swallowing.
  • Ensure adequate ventilation and avoid inhalation of vapour.
  • Wear suitable protective clothing, gloves and eye protection.
  • In case of skin contact, rinse with plenty of clean water, then cleanse with soap and water. Do not use solvent to clean the contacted area.
  • In case of eye contact, wash with plenty of clean water and seek medical advice.
  • If swallowed, seek medical attention immediately. Do not induce vomiting. 

Other Packing: 200 kg
Get Best QuoteRequest Callback
STP No 1 Liquid Waterproofing Plasticizing Admixture

STP No 1 Liquid Waterproofing Plasticizing Admixture

Product Price: Rs 85 / KgGet Best Price

Product Brochure

Product Details:
BrandSTP
Shelf Life12 months in original unopened sealed condition
Specific Gravity1.00 - 1.05
StorageStore in a cool dry place, under shed, away from heat
PackingAvailable in 1 kg Powder and 200 ml, liquid
Coverage Liquid0.2 to 0.4% by weight of cement
Coverage Powder2% by weight of cement
Liquid Application Methodology100 to 200 Ml per 50 kg bag of cement
Powder Application Methodology1 kg per 50 kg bag of cement
AppearanceLiquid, Powder
STP No 1 when used as an admixture forms an internal barrier against water penetration. It also increases the plasticity of mortar, reduces water absorption and thereby guards against freezethaw damage

It is available in powdered form without chlorides or in a liquid formula which contains additives for additional densification of the mortar or concrete. STP No 1 will not increase the air content of mortar or concrete. It complies with IS 2645.

Application:
  • Used in mass concrete foundation walls, floors that must be water tight. water tanks, terrace
  • slabs
  • Used in mortar for setting masonry and blocks.

Advantages:
  • Reduces moisture absorption as much as 60%
  • Reduces vapor transmission through walls and slabs
  • Reduces capillary action
  • Provides greater workability

Health & Safety:
  • Product should not come in contact with the skin and eyes, or be swallowed.
  • In case of contact with skin, rinse with plenty of clean water, then cleanse with soap and water. Seek medical advice if irritation persists.
  • In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice.
  • If swallowed seek medical attention immediately. Do not induce vomiting

Other Details:
  • Other Specific Gravity: 0.70 - 0.80
  • Other Packing: 30 kg Powder, 1 L, 5 L, 20 L & 200 L liquid
Get Best QuoteRequest Callback
ShaliPlast PCE Poly Carboxylated Ether Based Superplasticiser

ShaliPlast PCE Poly Carboxylated Ether Based Superplasticiser

Product Price: Rs 190 / KgGet Best Price

Product Brochure

Product Details:
BrandShaliPlast
ColorLight Browinsh
Shelf Life12 Months in original unopened condition.
StorageKeep in cool and dry place, under shed, away from heat
PackingAvailable in 250 kg barrel.
pH6 - 8
Specific Gravity 30 Degree C1.05 +- 0.04
Dosages, by Weight of Cementitious Material0.5- 2.0%
ShaliPlast PCE 200 is a third generation Poly-Carboxylated Ether based super-plasticizer for lower and medium grade concrete and mortar. It is an additive for concrete, mortar and plasters. It conforms to IS 9103 – 1999 and ASTM – C494 Type G. It also complies with IS : 2645 : 2003 as an integral waterproofing compound.

ShaliPlast PCE 200 is especially suitable for the production of concrete mixes which require high early strength development, high water reduction and excellent flow-ability:
  • For ready mix concrete
  • High workability concrete
  • Precast concrete
  • Fast track concrete
  • In situ concrete requiring fast stripping time. 

Advantages:
  • Pronounced increase in the early strength development, resulting in very economical stripping times for precast and in situ concrete
  • Extremely high water reduction, resulting in high density, high strength and reduced permeability for water etc. 
  • Excellent plasticizing effect, resulting in improved flow-ability, placing and compacting behavior
  • Higher cohesion reducing risk of segregation and bleeding
  • Improved shrinkage and creep behavior
  • Free from chlorides or other ingredients promoting corrosion of steel reinforcement. It is therefore suitable for reinforced and pre-stressed steel
  • It is compatible with all types of Portland Cement including SRC (Sulphate Resistance Cement) and Cement Fillers / substitutes like PFA, GGBFS and Micro Silica.. Always conduct trials before combining products in specific mixes and contact our Technical Service Department for information about specific combinations. 

Application Methodology:
  • Add ShaliPlast® PCE 200 to the dosing water or added with it in to the concrete mixer. It should not come into contact with dry cement
  • Dosing: Charge all concrete material in the proper order into the mixer with about 85% of the mixing water and mix for appropriate time. Add rest quantity of water with admixture to obtain the required slump and mix for additional 2 - 3 minutes
  • Overdosage may cause delay in setting time of concrete
  • Formwork: Forms for walls or narrow sections must be watertight, strong and must have good bracing. During the “Flowing period” the concrete will exert a higher pressure at the base of the form than conventional concrete. Form work for slabs is the same as for conventional concrete.

Health & Safety:
  • Avoid contact with skin / eyes and avoid swallowing
  • Ensure adequate ventilation and avoid inhalation of vapour
  • Wear suitable protective clothing, gloves and eye protection
  • In case of skin contact, rinse with plenty of clean water, then cleanse with soap and water. Do not use solvent to clean the contacted area
  • In case of eye contact, wash with plenty of clean water and seek medical advice. 
  • If swallowed, seek medical attention immediately. Do not induce vomiting
Get Best QuoteRequest Callback

EXPLORE MORE CATEGORIES

Looking For "Waterproofing Admixture"?
Thank youYour Enquiry has been sent successfully.
© STP LIMITED. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.